Restoration: Welding Cart Upgrade

1StGenOfDurham Restoration Project and other related topics
Post Reply
User avatar
Randy
Administrator
Administrator
Posts: 1401
Joined: April 7th, 2005, 9:06 pm
Province/State: Ontario
Hometown: Ajax
Model: 1978 Hatchback

Restoration: Welding Cart Upgrade

Post by Randy »

It much work on the car but I had to make more storage room, so I modified my welding cart to hold the spot welder and the plasma cutter. This frees up more room and cabinets and easy access to use. I added some extra hooks on the side from old long bolts with fender washers on the ends.
Before:
6FB4942A-4A8A-4189-B23B-D38B6887327B.jpeg
The uprights are from and old Sears garage door opener. I only had to cut a piece of 11x16 sheet metal from my car supplies.
Spray paint was a couple of black leftovers.

I also decided to widen the front to make it a bit more stable. I welded 3 pieces together from the garage door opener rails and mounted them underneath and out past the sides.
Attachments
576BA9BB-E3B0-424D-87A5-C3D8A1B063FA.jpeg
57C6643F-BE76-4C0B-89E7-F0F5A5B9EEAE.jpeg
F7F333C1-6F76-4A10-A737-5B1D76DB4D26.jpeg
14685E3E-4CCF-4098-8BB5-24FE5E593610.jpeg
FC3D1297-3B0E-495B-B4F6-8F7E11218A0A.jpeg
662484F7-0706-4503-8614-2D4AA224FAAA.jpeg
3AB44431-F76D-42F2-9843-5E45016931CC.jpeg
8AEE9293-3AB5-454C-8E53-987CE1C50B1B.jpeg
9929A783-CC22-47AA-8E55-A31E54214D36.jpeg
FE27332C-EFE2-40C3-8AD5-66E8C85A032E.jpeg
2EBFCF74-27BC-4E5E-9346-9D5B1CEA0061.jpeg
06526132-985B-480F-BB84-C79E70B63991.jpeg
9BC346A2-13AB-4A7A-B876-115B0FA93A78.jpeg
E3BA75AD-127E-44D9-9ACC-204F9BC5D7BD.jpeg
A445D4CA-A670-4039-AAE2-05139172869E.jpeg
Welcome to the Site.

Post Reply