but can I use the rods and crank to make the stroker motor. Great guide though.
thanks

By kiwi (210.55.80.13) on Saturday, September 06, 2003 - 04:24 pm:

EV1
1.3 8V SOHC
3bbl Carb
1342
60hp@5500rpm
73tq@3500rpm
'84-'86 Civic (USA)
'84-'86 CRX (USA)

http://www.geocities.com/honda_club_egypt/engines.htm

By kelly (141.152.55.24) on Saturday, September 06, 2003 - 04:12 pm:

Heres an odd one I found in the pick a part today. A 1.3L in an 85 of 86 honda civic hatchback. What gives? can I use the crank and rods for the motor buildup? This is a NON CVCC motor, has fuel and exhaust ports on opposite sides like the 1200. It also has a 4 speed trany. The engine ID is EV1-3003115
Trany ID is GV-2025206.
The yard crushes cars quickly so I'd like to get them if they are the ones. Also are there any tips-tricks to removing parts from these cars?
Thanks so much in advance.
Kelly