Thats great Jonathan, please feel free to contact me directly. It would be greatly appreciated. (click my name for e-mail address)

By Jonathan (68.193.6.173) on Friday, June 03, 2005 - 08:44 pm:

Nathan, those were old pictures of some parts I sold a few months back. I do have a few spare consoles sitting around. When I get to clearing out extra parts in a bit (probably towards the end of the summer) I'll post what I'm selling.

By nathan (24.81.144.65) on Friday, June 03, 2005 - 06:33 pm:

Jonathan, under the parent directories it shows an over head console for sale...is that still the case?

I would be interested once I pay off my header and possibly an intake as well

By kris (Kris) (207.216.228.77) on Friday, June 03, 2005 - 05:27 pm:

Hey great news! I was the wires and found this little switch in-behind the dash that somone hard wired in that turns the fan on and off... so ya problem solved!

thanks for the link though.. it'll come in handy!

thanks guys

kris

By Jonathan (68.193.6.173) on Friday, June 03, 2005 - 04:18 pm:

1200's:
http://web.njit.edu/~jjj8778/Civic/Diagrams/Wiring_1200/

CVCC's
http://web.njit.edu/~jjj8778/Civic/Diagrams/Wiring_CVCC/

By DaRk (66.50.181.171) on Friday, June 03, 2005 - 10:37 am:

No prob. Kris... anything that could help for another 1stgen owner... Any1 else needs it?

By aryl (216.99.194.124) on Friday, June 03, 2005 - 01:50 am:

you can find a number of manuals on ebay for next to nothing. i'd suggest getting a few. the cylmer has a great color wiring diagram/layout. the shop manual is in-despensable. the idiots guide i find helpful often also. the haynes is very good.

By kris (Kris) (207.216.228.77) on Thursday, June 02, 2005 - 09:50 pm:

Hey thanks alot there dark! that should get me off on the right foot.. Im just trying to figure out what they call that little sensor on the diagram.

Thanks


kris

By DaRk (66.50.182.79) on Thursday, June 02, 2005 - 08:35 pm:

Kris... e-mail sent. hope it helps

By kris (Kris) (207.216.228.77) on Thursday, June 02, 2005 - 08:05 pm:

Hi there guys.... After I replaced my headgasket I got my civic running and driving! So I looked for the possibilities of the failure/ overheating that caused the gasket to blow... So far I found that those 2 wires that are supposed to hook to the temp sensor in the bottom of the rad are not hooked up. I have looked for a wiring diagram on here but people seem to just email them to each other... the site that kept coming up in the search that supposedly has them is down... and my poorly written general chilton doesnt have any wiring diagrams... soo.. if anyone has the wiring diagram for a 1978-79 1200 or any for that matter please email me at :

prozzakdose14@hotmail.com

If you have the diagram is similar to another honda please email me... i have enough room....

Any help is much appreciated

Kris