sounds good, the number is for my cell, so you should get me.

Thanks,

By Don (199.2.139.208) on Monday, June 20, 2005 - 08:10 am:

Eric my e-mail is still down will be delivering the floor / rocker a front to the UPS store today. Expect a call at the # you gave me.

By thebige73@yahoo.com (Ejl2002) (66.84.137.106) on Friday, June 17, 2005 - 01:03 pm:

I know, I would have taken the whole thing, I saw 1 on ebay, but it was in Idaho, just would not be cost efective to get it here. I plan on keeping this car in the garage during the winter, so hopefully no rust ever again. They use more salt flakes here then we get snow flakes. Thanks again for all of thew time you are putting into this. I will show all the progress as it goes along.

Thanks,
Eric

By Don (199.2.139.176) on Friday, June 17, 2005 - 12:47 pm:

I dont have e-mail (Home computer is down) but I did remove the fenders seats and hood this morning. I have a guy comming to the shop to cut out the panels. I am going to cut out areas bigger than you need and then take that down to the UPS store to see how much shipping is. I can always cut the panels down but I figured its better to have too big a section than too small. Its a shame you can't just pick up the whole body it would save lots of work and there is not a drop of rust that I can find.

By thebige73@yahoo.com (Ejl2002) (66.84.137.106) on Friday, June 17, 2005 - 11:14 am:

Just figured out how to post pictures, so I went ahead and put a few on.

Eric

By Don (199.2.139.191) on Friday, June 17, 2005 - 11:10 am:

Hey eric Why are you posting when you allready bought the panels from me?

By thebige73@yahoo.com (Ejl2002) (68.72.110.231) on Thursday, June 16, 2005 - 07:47 pm:

By thebige73@yahoo.com (Ejl2002) (68.72.110.231) on Thursday, June 16, 2005 - 07:44 pm:

By thebige73@yahoo.com (Ejl2002) (68.72.110.231) on Thursday, June 16, 2005 - 07:33 pm:

By thebige73@yahoo.com (Ejl2002) (66.84.137.106) on Tuesday, June 14, 2005 - 08:52 am:

Don, wanted to check in and see if I can get that metal from you. Let me know,


Thanks,
Eric

By Yellowcivic (67.139.225.190) on Sunday, June 12, 2005 - 02:05 pm:

You have to copy the corner-top (latch sides). I cut mine with a razor blade mitered to match originals. They bend everywhere else. Nice fit and keeps the glass from wind noise.
David

By thebige73@yahoo.com (Ejl2002) (68.23.180.58) on Sunday, June 12, 2005 - 09:43 am:

Alright, just ordered 2 window run rubbers, I take it they will bend up easy to stay in the channel?

Thanks

By yellowcivic (67.139.225.29) on Saturday, June 11, 2005 - 03:52 pm:

Window runs (felt) can be bought through JC witney # SF184884T you will need one per door. They work really good.
David

By Don (216.104.65.116) on Saturday, June 11, 2005 - 11:30 am:

You wont find any good 30 year old rubber at least I have never seen any. The pictures are ok

By thebige73@yahoo.com (Ejl2002) (68.23.174.147) on Saturday, June 11, 2005 - 10:31 am:

Hey Don, I sent the pic's to the email from your shop. If they are unclear, let me know, I will try to get something better. I also need some rubber if the car still has any. I am looking for the body side rubber for the hatch, and the rubber just below the roof line for the hatch. Also, could use the window runs if they are in good shape.

Thanks, Eric

By Don (63.135.203.18) on Saturday, June 11, 2005 - 05:19 am:

I can get you the sheet metal, go to my website www.autoracer.net and e mail me the pictures once I can figure out shipping then I can see whats left.

By thebige73@yahoo.com (Ejl2002) (68.72.166.157) on Saturday, June 11, 2005 - 05:11 am:

Are you still able to get me the other parts? I am going to get pics today, so please let me know.

Eric

By Don (63.135.203.83) on Friday, June 10, 2005 - 08:11 pm:

I'm sure someone can help you find the parts you looking for... Just checked and I dont have a rear bumper anyway

By thebige73@yahoo.com (Ejl2002) (68.72.101.224) on Friday, June 10, 2005 - 07:44 pm:

I will try to get some pic's in the morning and upload them. Thanks again for your time and interest. Also, the 350.00 will be my absolute max right now includding shipping just so you know up front.

Thanks, Eric

By Don (63.135.203.83) on Friday, June 10, 2005 - 06:48 pm:

That sounds ok, I guess the civic is spared for one more week. Send me pictures of what and were you want cut out, then I will check on freight costs. If everythings ok then you can pay by cc and I can have it palleted in a few days.

By thebige73@yahoo.com (Ejl2002) (68.23.161.250) on Friday, June 10, 2005 - 06:39 pm:

I would have around 350.00 or so to spend, So if you feel it would be possible to work around there, I am a willing buyer. I need the rear bumper, drivers rocker and drivers floor behind the seat most, the front part I could deal with out. Even if you used a saws all, that would be fine, I can clean up the rest here.
I am located near Chicago, zip is 60025 for shipping, and it would be a buisness address. I understand if it is to much work, so feel free to let me know either way.

Thanks for your time Don,

Eric

By Don (63.135.203.83) on Friday, June 10, 2005 - 04:58 pm:

Ok here is what I have run into before, people want rust free body parts but they seem to disappear if the talk of money rolls into the picture. I have a 76 civic thats on the trailer to go get smashed, but it takes time to remove panels, seats get the thing up in the air etc.... In fact like I told one guy the panels are free but I'm not giving away my shop time (I am short of that already and if there is some extra I'm working on my own projects ) and I have to rent a plasma cutter. Or I could have a local body shop do the work but thats more $$$$.
Then shipping rolls into the picture ..... So the panels delivered to your door could run a few hundred dollars give or take a hundred.
If your serious give me a call or leave a message if not that's ok too. 541-535-9305 but its gone to the crusher tomorrow morning by 8am

By bruce (70.105.66.30) on Friday, June 10, 2005 - 03:29 pm:

<<<<<over there under formatting

By thebige73@yahoo.com (Ejl2002) (66.84.137.106) on Friday, June 10, 2005 - 06:05 am:

I have a 75 civic undergoing a resto. I need the floor from behind the drivers seat rear support to the front of the back seat, and from the rocker to the tunnel, if anyone is willing to cut this out of a car. I would like to get an original piece so it has the riggity from the ribs in the panel. Also needed is the lower front valance (bottom of core support) from were the fenders bolt on at the bottom and then as far up the panel as can be cut easly, staight accross. The left rocker is also needed but this may be a long shot. One last thing, maybe a good rear bumper. If I am nuts, let me know, if you guys can help, let me know.

Thanks,
Eric

Also, how do you post pic's, I tried to cut and paste, it did not work