The outer lip (unpainted area) is smooth and could be polished easily. The centre could be left black or repainted silver. There is only one center cap and for some reason its an Enkei cap thats on it.

They are 13"x5.5" - basically will hold up to a 195 with no problems.

There is rubber on them but the tires were flat when I got them. Probably from sitting but not much tread left anyway.

Like I said there is only three of them though. About $50 Canadian???? I only grabbed them as they were 13" in 4X120 and they would have been thrown out if I didn't take them. Figured someone could use them.

A few people had a few sets including Quickrick but he may have sold them along with all his other collection.

Let me know and I can take some more photos of your interested.

By nathan (24.85.232.159) on Wednesday, July 27, 2005 - 02:06 pm:

are they 13" x 165's?

There not bad hey, classic mesh, kinda like BBS or Enkie. Do you think they could be polished?

Well, let me know what you want for them...

oh any rubber on them?

By Kurt (205.250.99.236) on Wednesday, July 27, 2005 - 12:41 pm:

yup...

scroll down the page...they are here:

http://www.civic1200.com/discus/messages/3923/8861.html?

By nathan (24.85.232.159) on Wednesday, July 27, 2005 - 09:31 am:

4 x 120?

Drop me an e-mail Kurt...maybe a couple photo's....

By Kurt (205.250.99.236) on Tuesday, July 26, 2005 - 11:01 pm:

wow, your still looking? That one I mentioned earlier was a 12" of a similar but different design.

The Libras I was looking at have now disappearred.

Off topic but I have 3 13" Appliance wheels if anyone wants them.. CHEAP...don't want them but do not want to throw them out.

- Kurt

By Ed (24.100.5.141) on Tuesday, July 26, 2005 - 09:34 pm:

ANYONE ?!?!

come on... any leads at all ???

thanks
Ed

By Ed (24.100.5.141) on Friday, June 03, 2005 - 05:47 pm:

bueller ? bueller ? bueller ?

By Anthony Stewart (203.173.8.223) on Wednesday, June 01, 2005 - 07:57 pm:

MAIL SENT

By Anthony (203.129.51.47) on Tuesday, May 31, 2005 - 02:38 am:

Art, email me and I will chase up a photo.

By Art (211.28.50.140) on Tuesday, May 31, 2005 - 12:43 am:

Any pictures? Or can you describe your wheels?

By Anthony Stewart (203.129.48.244) on Saturday, May 28, 2005 - 07:53 pm:

$150.00? they need painting etc, but obviously are hard to get, but I am not going to use them.

By Art (211.28.50.140) on Friday, May 27, 2005 - 05:06 am:

Anthony, How much do you want for your wheels?

By Anthony Stewart (203.129.43.66) on Wednesday, May 25, 2005 - 08:09 pm:

I have set of the Accord 13in wheels, but I am Australia.

By Ed (24.100.5.141) on Wednesday, May 25, 2005 - 05:27 pm:

aw... COME ON... somebody must be able to help me out ??!!

I get a break on refinishing if I have more than 1 set.... which means I can refinish a set for a trade on the fourth wheel.

thanks
Ed


thanks
Ed

By Ed (216.13.17.194) on Thursday, May 05, 2005 - 10:44 am:

ANYONE ???? ANYONE ???? ANYONE ???? ANYONE ???? ANYONE ????

also... I need a fourth wheel to complete a set of 3 , 13" accord alloys

ANYONE ????

I am willing to trade for a FULL SET of refinished set of 12" alloys.

I will send pics once someone finds the fourth wheel(s) for me.

thanks
Ed

By bruce (70.104.107.13) on Saturday, April 23, 2005 - 03:10 pm:

no clue ed, just hang onto them and keep looking

By Ed (24.100.5.141) on Saturday, April 23, 2005 - 02:50 pm:

ANYONE ????

any ideas on how / whether I could get these custom fabricated and how much ????

Kurt.... did you ever find out abou the wheel ?

thanks
Ed

By Ed (24.100.5.141) on Thursday, April 21, 2005 - 04:34 pm:

Well ....

can anyone help me find just ONE more wheel ??? I have three just waiting for tires,but need a fourth.

I was / am working on a deal to get a fourth wheel... but that may fall through.

ANYONE ?!?!?!

thanks
Ed

p.s. I will pay for shipping of course... and the wheel.

By Greggearhead (Greggearhead) (69.171.232.78) on Tuesday, December 28, 2004 - 05:51 pm:

I have a set of G1 Prelude 13" alloys.

By Kurt (205.250.75.226) on Tuesday, November 09, 2004 - 07:34 pm:

Nothing yet. I got a hold of him but he was pretty sure it was a 12" I have not had a chance to make it down there yet to confirm it though.

By Ed (66.185.85.75) on Tuesday, November 09, 2004 - 04:12 pm:

Kurt:

anything yet ???

justin was only able to get 3.

Richard:

wanna trade a set of accord alloys ??? or something else ????


Ed

By Kurt (205.250.75.226) on Wednesday, September 22, 2004 - 04:14 pm:

He would likely give it to me for next to nothing.

By Rock_Prawn (Rock_Prawn) (24.64.223.204) on Wednesday, September 22, 2004 - 11:48 am:

does it need to be a 13"

I have 2 12" ones

By Ed (66.185.85.79) on Wednesday, September 22, 2004 - 10:01 am:

Kurt

justin is helping me locate one.

I would be willing to trade... or would be EXTREMELY grateful if you are able to locate one (1) as , I only need 1.

it is the wheel at the bottom of the page... NOT the turbine style.

thanks
Ed

p.s. money is REALLY limited right now... so there isnt' a hurry, unless the guy is going to throw it out... then I will do the cash advance on VISA thing.

thanks

By Kurt (205.250.75.226) on Tuesday, September 21, 2004 - 11:54 pm:

Ed, I think I may know of one. Its either that one or one of a similar design, I think Justin posted a pic of the other design once.

I bought parts off the guy about a year and a half ago and left the wheel as there was only one. I am trying to get a hold of him for some old Lybra wheels but it may take some time. He is hard to get a hold of...Will let you know.

- Kurt

By Ed (24.100.5.141) on Tuesday, September 21, 2004 - 07:50 pm:

ANYONE ?!?!?!?!

Richard... wanna sell your set ???

ANYONE ELSE ?!?!?! there must be one somewhere !

thanks
Ed

By Ed (24.100.5.141) on Saturday, August 28, 2004 - 12:29 pm:

anyone ??? seen these anywhere ??? any price ?????

Justin:

let me kknow about the other wheels

thanks
Ed

By Ed (66.185.85.79) on Monday, August 23, 2004 - 05:29 am:

the set I have are 12" NOT 13"

Ed

By Jonathan (68.193.6.173) on Sunday, August 22, 2004 - 06:28 pm:

I just went to re-check my 13" turbines, and they're 5.5" between the lips. Were the turbine wheels offered in different widths, or were they all the same?

By Ed (66.185.85.79) on Sunday, August 22, 2004 - 05:40 pm:

I think the set of turbines I have are 5" wide, using the "inside" measurement.

Ed

By Quikrick (Quikrick) (63.204.16.66) on Friday, July 30, 2004 - 11:50 am:

Just a reminder on how to measure the wheel width. It's taken from the inside lip to inside lip.

This wheel is 5.5"

By Jonathan (68.193.6.173) on Friday, July 30, 2004 - 11:10 am:

The set of the Turbine wheels I have are 5.5" wide.

By Ed (216.13.17.194) on Friday, July 30, 2004 - 10:31 am:

they are 4X120, standard honda OEM accessory wheels... whatever that width is ?!?!

I will check tonight when I am home.

Ed

By Phil (Fireballphil) (63.116.174.254) on Friday, July 30, 2004 - 05:33 am:

Ed---
Referring to the multi-spoke wheel; How wide are they and are they 4x120?
Thanks,
Phil

By Ed (24.100.5.141) on Thursday, July 29, 2004 - 10:51 pm:

anyone ???

thanks
Ed

By Ed (66.185.85.79) on Sunday, September 28, 2003 - 05:58 pm:

I have a set of those too.....

They would need to be refinished, but.... I need a fourth 13" 6 spoke wheel as pictured below.... so I might be willing to sell the 'turbine' / 'multi-spoke' wheels , once I find the fourth 13" 6 spoke wheel .

thanks
Ed

By Keil Shepherd (Medicineman) (213.122.241.33) on Sunday, September 28, 2003 - 12:17 pm:

Hi Ed

Don't know if this is any help but those Accord alloys, they're not the 13" multi-spoke mk1 wheels are they? Look a little bit like this?



I don't have any alloys to trade but I could make you an offer for them if you like. If you want to get in touch my e-mail is:

kl.shepherd@btopenworld.com

By Ed (24.102.180.208) on Sunday, September 28, 2003 - 10:38 am:

.

By Ed (66.185.85.79) on Tuesday, September 02, 2003 - 03:07 pm:

anyone ????

I might be willing to trade some 13" accord alloys !

thanks
Ed

By Ed (66.185.85.79) on Monday, September 01, 2003 - 11:15 pm:

Does anyone know where I can find one or more of these wheels ????

Any help is appreciated. trades even ?!



thanks
Ed