Build Kurts 1978 Honda Civic Trailer

Civic 1973-1979 Projects
Post Reply
User avatar
Kurt
LSD
LSD
Posts: 2054
Joined: August 3rd, 2005, 12:56 am
Province/State: British Columbia
Hometown: Maple Bay
Model: —————-

Kurts 1978 Honda Civic Trailer Build

Post by Kurt »

Thats the plan yup! You coming up this year ?!

User avatar
Kurt
LSD
LSD
Posts: 2054
Joined: August 3rd, 2005, 12:56 am
Province/State: British Columbia
Hometown: Maple Bay
Model: —————-

Kurts 1978 Honda Civic Trailer Build

Post by Kurt »

Got the receiver mounted today and tacked up the rest. The receiver will hang down about 3/4" to 1" below the rear bumper. I used 1/4" steel plate to mount the receiver to the cross member and drilled the 2 holes for the safety chains.

first real set back at the end of the day though: I was finding a had a bit of flex in the 2 mounting plates I made to mount the assembly to the car. I used 1/8" steel plate for these but should have used 1/4." Would probably be fine but I don't like the idea of having any flex in a trailer hitch frame so I ripped those off and am fabbing up new ones from 1/4" I am starting ti think I have gone from a class 1 hitch to a class 3 :)

User avatar
Kurt
LSD
LSD
Posts: 2054
Joined: August 3rd, 2005, 12:56 am
Province/State: British Columbia
Hometown: Maple Bay
Model: —————-

Kurts 1978 Honda Civic Trailer Build ** Completed** :)

Post by Kurt »

Got the hitch all welded up with the mounting plates for the 73-77 bumper
IMG_0563.JPG

User avatar
Kurt
LSD
LSD
Posts: 2054
Joined: August 3rd, 2005, 12:56 am
Province/State: British Columbia
Hometown: Maple Bay
Model: —————-

Kurts 1978 Honda Civic Trailer Build

Post by Kurt »

New Tires! Figured I spent over $60 just in sandpaper and these new were only $100 for a set of 2 (via no-links)
IMG_0562.JPG

User avatar
Kurt
LSD
LSD
Posts: 2054
Joined: August 3rd, 2005, 12:56 am
Province/State: British Columbia
Hometown: Maple Bay
Model: —————-

Kurts 1978 Honda Civic Trailer Build

Post by Kurt »

Body work through last weekend of April.

Heating and cooling to shrink the metal at the rear (it was dented pretty bad)
IMG_0557.JPG
....more Body work
IMG_0560.JPG
Primer/Sealer going on. I used a make shift paint booth. The trunk lid, matching cooler, bumper filler panel, hitch and gas door were all hung for painting while off the car/trailer.
IMG_0581.JPG

User avatar
Kurt
LSD
LSD
Posts: 2054
Joined: August 3rd, 2005, 12:56 am
Province/State: British Columbia
Hometown: Maple Bay
Model: —————-

Kurts 1978 Honda Civic Trailer Build ** Completed **

Post by Kurt »

Base Coat and Clear going on. I used two coats of sealer primer, three of base coat and three coats of clear. I wet sanded and buffed it all out after about 3 weeks of letting it sit and gas off.
IMG_0587.JPG
IMG_0595.JPG
Painted hitch mounted to the car...
IMG_0632.JPG
Last edited by Kurt on May 25th, 2018, 1:03 am, edited 1 time in total.

User avatar
Kurt
LSD
LSD
Posts: 2054
Joined: August 3rd, 2005, 12:56 am
Province/State: British Columbia
Hometown: Maple Bay
Model: —————-

Kurts 1978 Honda Civic Trailer Build

Post by Kurt »

2nd week of May 2018.

I used Odyssey Soft Touch boat canvass in black for the top and stainless steal snaps (32 of them!). The pink foam was first covered in a faux carbon fiber vinyl wrap that I painstakingly wrapped myself (yes its tough to work with!).

The actual canvass top was done by friend and neighbour who happens to be a seamstress by trade. The contoured top turned out very well.

I sourced out an after market trunk seal years back (JC Whitney) I believe that was also trimmed to fit.
IMG_0621.JPG
IMG_0626.JPG
IMG_0629.JPG

User avatar
Kurt
LSD
LSD
Posts: 2054
Joined: August 3rd, 2005, 12:56 am
Province/State: British Columbia
Hometown: Maple Bay
Model: —————-

Kurts 1978 Honda Civic Trailer Build

Post by Kurt »

I mocked up the interior prior to painting it. I was gonna leave it black but figured I would make the floor flat. I used 1/8" baltic birch plywood for the interior panels as its strong but very light. Once cut I used trunk liner material to wrap it using 3M spray glue and staples. I used a piano hinge for the spare tire well to either use a spare tire or for some extra storage underneath.

I was able to source some chrome cargo mounts from an Audi/VW from no-links that I recessed into the floor. I actually welded up some feet into the floor for them to mount to so they are very strong and lie good and flat when not in use.

You can't see it in the photo but there is also a 3AA battery powered LED strip under the recess near the trunk to illuminate it at night. It works quite well.

The cooler was just for fun that I bought online from Costco. It started out white as a Coors Light cooler but I painted it green when we painted the shell. The "CIVIC" decals I had made up at a local sign shop.
IMG_0639.JPG
IMG_0639.JPG
Attachments
IMG_0638.JPG

User avatar
Kurt
LSD
LSD
Posts: 2054
Joined: August 3rd, 2005, 12:56 am
Province/State: British Columbia
Hometown: Maple Bay
Model: —————-

Kurts 1978 Honda Civic Trailer Build

Post by Kurt »

All Done! Ready for our annual May Long Weekend road trip. I put 1200kms on the car and trailer after these photos were taken. Sways a bit over some bumps so will get the alignment checked and may swap in some heavier springs but it tows good.

I was warned of rock chips on the front panel so I had the local sign shop install a clear 3M film over the front panel. The film is designed to for this purpose.

I wet sanded the body with 1200, 1500, 2000 and 2500 grit to remove any orange peel, a run and some dust bunnies (and one bug) that got in there due to our garage made paint booth.

All Done!
IMG_0648.JPG
IMG_0650.JPG
IMG_0657.JPG
IMG_0645.JPG
IMG_0644.jpg
IMG_0653.JPG
IMG_0654.JPG

User avatar
Kurt
LSD
LSD
Posts: 2054
Joined: August 3rd, 2005, 12:56 am
Province/State: British Columbia
Hometown: Maple Bay
Model: —————-

Kurts 1978 Honda Civic Trailer Build

Post by Kurt »

PicCollage.png

Post Reply