Project MIELKO First Generation Civic SB1 from Holland

[mielko]

Hello,
I would like to introduce myself.
Im mielko
Live in Holland ,Europe
Date of birth,1978 ,6 january

What am i doing here?: Bothering you guy's with tech questions :D

As My old eb 1 is not equiped with ECU's ,inlet air sensors or lambda's .Its a bit of my knowledge.






These are the opel kadel rims,with i'm remaking,to fit 4*120 .
ATS classic 13" 6J wide

this is how i pay for my hobby's,I lighten flywheels,this is a "special i made for a friend.its a B16A2 ,With i lightend from 7,6 to 3,8kg.

[mielko]

So ,introducing my honda,

Its a 1976 1200 EB1 hondamatic.With is except from a home made 54MM stainless exhaust ,bone stock.
Previous ownes has restored it,and is stil in pretty good condition.Although the rust monster is still under its skinn in some parts .

Interior:
its getting a meter console,with narrow band lamda meter,so i can set the carburetor jets ,as i'm going to put some motorcycle carburetor on,in the far future.
Steering wheel of unknown mark,28cm,yes that is small :roll:

Engine is still a EB1,i had it on the dyno,and it made 21,6hp on the wheels
Not realy what i wanted to be,the valva cover reveals some sludge,so i think the head gasket has had its time.

I bought a EB3 ,for spare parts ,with a EB3 engine,i'm going to rebuilt that engine.

[mielko]

I started with doing a mega maintenance,fluids,points ,leads,filters.

Onley taking out the complete ignition gave me the fist trouble :evil:

question this will be posted now on other part on this forum

[mielko]

Honda has run with points for decades ,so it shoult run ok,although swapping to electronic will be done in the future

[mielko]

Pics will come within 2 days,as the forum won.t allow me yet

[mielko]

Here the pics as promised: :D

These are the opel kadel rims,with i'm remaking,to fit 4*120 .
ATS classic 13" 6J wide

civ76velg2.JPG (42.2 KiB) Viewed 9796 times

This is how i pay for my hobby's,I lighten flywheels,this is a "special i made for a friend.its a B16A2 ,With i lightened from 7,6 to 3,8kg.

bbspecial.JPG (45.95 KiB) Viewed 9796 times

other machining!

civ76velg.JPG (39.88 KiB) Viewed 9796 times

foto van de downpipe"

[Vulcan]

These cars just aren't dressed without driving lights! 8)

Interesting work machining those wheels.

[joshuao]

That's a sweeeeet ride you have there and those opel wheels look fantastic!

[Blackbullet]

That cars a beauty 8) . I'm really interested in what you have done with the opel kadet wheels. Whats the down pipe?

[mielko]

A friend i me was going to weld the original bold holes,onley we found out that these rims have hardend inserts in the bold hole,and did not want to force them out,so i'l leave it this way.

I bought 165/60/13 for the front end,and 175/50/13 pirellie tires,i'l try a test fit this week maybe.If it works ,the are gonna be pouwdercouted in bronze colour.
The rims are 13" 6J ,ET30,if et 30 is to far out,I can machiene them to et35 and stil be strong

The down pipe is from the original cast piece back,into home made absorber,into harley davidson fishtail end :D .Just for fun now.
Complete system is 52mm stainles pipe.

I,m gonna build a header later.
But other prioratie's firs.