Restoration: 1978 Honda Civic (1200) Part 2
Repairing the rust holes and lots of welding.
- Randy
- Administrator
- Posts: 1449
- Joined: April 7th, 2005, 9:06 pm
- Province/State: Ontario
- Hometown: Ajax
- Model: 1978 Hatchback
Re: Restoration: Randy's 1978 Honda Civic (1200)
During my last trial fitting I noticed the gap was a little bigger between the seat bracket and the inner rocker. I used a ratchet strap to pull it in and was able to tack it in place.
Next I have to position the rear seat post which will be easier to line up as I drilled through the spot welds and the floor.
Then I will be racking the floor to the rocker and spot welding it together along the pinch seam underneath.
https://youtu.be/IhLST-5l8iE
I do not endorse the site nor was I asked for permission to use or re-publish the information from here.
He scraped the web for past pages that are already included in the database of this site known as 1StGenCivic.com/org or previous generations and upgrades.
I am closing site down as an open discussion forum.