Project My first classic Honda

Civic 1973-1979 Projects
panchoyonions
Member
Member
Posts: 25
Joined: April 7th, 2018, 6:49 pm
Province/State: Wisconsin

Project My first classic Honda

Unread post by panchoyonions »

DSC_0442.JPG
This is my first classic Honda.
Traded my E28 for this little guy. I will post more pics. Has quite a bit of things done to it. And will post some more details as I go on.
Attachments
DSC_0446.JPG
DSC_0441.JPG

panchoyonions
Member
Member
Posts: 25
Joined: April 7th, 2018, 6:49 pm
Province/State: Wisconsin

My first classic Honda

Unread post by panchoyonions »

When I got the car it was not maintaining idle very well but once you were driving down the road it ran great. Engine has about 3200 miles and was rebuilt by King motorsports here in Wisconsin. I ran a compression test and reading came out to being 210 212 210 209 which made me very satisfied. I narrowed it down to the carburetor needing attention. The Dellorto DHlB35 are currently waiting for the gaskets to come in sometime this week. I have kept myself busy by removing the bad tint and removing the black dye/paint that covered the oem tan color which I think is nicer.
Attachments
DSC_0458.JPG

panchoyonions
Member
Member
Posts: 25
Joined: April 7th, 2018, 6:49 pm
Province/State: Wisconsin

My first classic Honda

Unread post by panchoyonions »

Dhlb35 carburetor removed
Attachments
DSC_0448.JPG

panchoyonions
Member
Member
Posts: 25
Joined: April 7th, 2018, 6:49 pm
Province/State: Wisconsin

My first classic Honda

Unread post by panchoyonions »

While I'm waiting for the service kit to arrive for the carburetor. (Taking forever) I decided to to finish removing the black vinyl dye off and am very excited to see the tan color. Now just have to do the driver side and also rear seat.
Attachments
DSC_0460.JPG

panchoyonions
Member
Member
Posts: 25
Joined: April 7th, 2018, 6:49 pm
Province/State: Wisconsin

My first classic Honda

Unread post by panchoyonions »

Ok a little update. Just finished with the servicing on the Dellorto. Need some final adjustments and syncing that need to be done. But was very happy driving her.
Love the tan interior. Next thing is carburetor adjustments and thinking of installing these 240z seats new tan covers and foam will be done before installation. Will be going with the earlier seats with the four back vents
Attachments
DSC_0475.JPG

panchoyonions
Member
Member
Posts: 25
Joined: April 7th, 2018, 6:49 pm
Province/State: Wisconsin

My first classic Honda

Unread post by panchoyonions »

These are the seats I will be installing
Attachments
DSC_0468.JPG

panchoyonions
Member
Member
Posts: 25
Joined: April 7th, 2018, 6:49 pm
Province/State: Wisconsin

My first classic Honda

Unread post by panchoyonions »

Love the tan panel
Attachments
DSC_0472.JPG

User avatar
Stephan
Member
Member
Posts: 15
Joined: April 29th, 2014, 3:45 pm
Province/State:

My first classic Honda

Unread post by Stephan »

:cool
vcvcxzv.JPG

panchoyonions
Member
Member
Posts: 25
Joined: April 7th, 2018, 6:49 pm
Province/State: Wisconsin

My first classic Honda

Unread post by panchoyonions »

It was indeed rebuilt by King Motorsports herein Waukesha.
Car was running great then it started acting up :dunno again.
Came out running worse with the occasional back fires and burping through the carburetor. Checked fuel pressure gauge and its barley pushing fuel through. needle sits at zero with an occasional bounce to almost 1.5psi

panchoyonions
Member
Member
Posts: 25
Joined: April 7th, 2018, 6:49 pm
Province/State: Wisconsin

My first classic Honda

Unread post by panchoyonions »

Replacing fuelpump with this unit from Mr.Gasket. Old is on top new on the bottom. reading reviews on these pumps. They either do well or they last a few thousand miles. Does anyone have good experience with electric pump they would like to share.
Attachments
DSC_0478.JPG

Locked