I can pull that harness for you. If its in good enough shape. Maybe for a small fee.

By Kurt (207.6.118.157) on Wednesday, August 04, 2004 - 06:14 pm:

Looks like I may need a 1200 wiring harness. The one that runs through the firewall to the large plug under the dash.

- Kurt

By Jonny (207.34.183.145) on Wednesday, August 04, 2004 - 03:01 pm:

I have something for you kurt...

email me at jearl31@hotmail.com

By Kurt (207.6.118.157) on Wednesday, August 04, 2004 - 08:15 am:

Looks like I may need a 1200 wiring harness. The one that runs through the firewall to the large plug under the dash.

- Kurt

By Kurt (207.6.118.157) on Wednesday, August 04, 2004 - 08:10 am:

Looks like I may need a 1200 wiring harness. The one that runs through the firewall to the large plug under the dash.

- Kurt

By Jason (Jason) (205.188.116.204) on Wednesday, August 04, 2004 - 12:55 am:

If you want a cheap civic in So. Cal I think you can get them for as cheap as $500 if your willing to wait and look hard and goes up to around $1200. I've seen one or two around my area I guess I could try to catch one of the owners and propose a sale. How cheap, cheap are you talking and by when.Dkmanucci@yahoo.com

By Canada76civic (Canada76civic) (68.146.162.237) on Monday, August 02, 2004 - 07:36 am:

sdcvcc, did you get my e-mail about the parts? I guess you're busy at this moment...whenever you're ready with the total, let me know so I can save up to mail to you. Thanks!

By Jason (Jason) (64.12.116.204) on Monday, August 02, 2004 - 12:32 am:

I need a windshield for a 1977 civic hatchback. I need a hood too but have to wait for more funds.Thanks.

By sdcvcc (68.101.197.93) on Sunday, August 01, 2004 - 06:42 pm:

The tape deck I pulled is aftermarket i think. It is by Sony.
Trying to upload the pics.

By del (207.6.167.20) on Sunday, August 01, 2004 - 05:57 pm:

sdcvcc,
all i want from the junkyard find is the
AM-FM TAPE DECK (or 8TRACK PLAYER )
pls. advise.
delcab88@hotmail.com
thanks

By Dave (206.172.136.39) on Sunday, August 01, 2004 - 04:19 pm:

Can any of you Cali guys tell me how much a rust free 1200 civic with a mint body(small dings dont matter) goes for out your way? Does not matter the interior or engine. Cheap cheap is what im looking for. A 1975 hatch would be best. Thanks
Dave

By Dave (206.172.136.39) on Sunday, August 01, 2004 - 04:16 pm:

Can any of you Cali guys tell me how much a rust free 1200 body goes for out your way? Thanks
Dave

By Ed (66.185.85.79) on Sunday, August 01, 2004 - 09:58 am:

I'll take the stock am/fm stereo tape deck.... Please get me a picture first, because:

The am/fm OEM stereo went in the stock location, and the accessory tape deck went in the cubby hole below the cig. lighter/rear window defroster controls.

IF the am/fm tape deck is combined into one unit... then it is not stock , nor an OEM option.... but, if you can get a pic, I might be interested. Either way... keep me in line.

any luck on the hotwheel ??? :-)

thanks
Ed

By Kyle Thomson (24.83.12.187) on Sunday, August 01, 2004 - 09:33 am:

How much would you want for the fuel/temp gauge? my set has some surface rust on the faces, I've been looking for someone with just a half set

By Jonathan (68.193.6.173) on Sunday, August 01, 2004 - 08:37 am:

I'd be interested in one of the rear wiper setups for the spare parts, and I still need some of the washer bits. I'm also interested in the radio.

By sdcvcc (68.101.197.93) on Saturday, July 31, 2004 - 11:16 pm:

Hoods $50*****

By sdcvcc (68.101.197.93) on Saturday, July 31, 2004 - 11:14 pm:

I think windshields are around 30-50$.
Tell me year and model and I will see if they have a good one.
Also I know there are 2 or 3 rear window wiper setups.

By Jason (Jason) (205.188.116.204) on Saturday, July 31, 2004 - 11:01 pm:

How much does a windshield go for ? mine's got a big crack, and could possibly use a hood if the price is right. I'm in Long Beach CA.

By sdcvcc (68.101.197.93) on Saturday, July 31, 2004 - 08:30 pm:

I didnt have time to grab much.

I found a stock stereo/tape deck.
Good shape , will test it.
75 Fuel pump, working.
Center mount fuel and temp. cluster.

CAN GET:
- chrome headlight trim ring, (both sides)

- front and rear chrome bumpers (straight, and rust free, no dents) Mine are for sale. 75.

-front and rear side markers

- all red tailights

If anyone really wants to do a wagon front conversion I can pull a whole setup. There 4 or 5 wagons with complete suspension and brake. I am estimating the price for spindles, hubs, and brake stuff to be around 120-150$ for both sides.
Brakes probably included. I will confirm the prices.

-I am selling my front and rear bumpers. Mine have the rubber bumper things. Pretty darn straight and no rust. Need a buffing. Will take pictures.

email: joelandtammy@yahoo.com

I might make another trip tomorrow to pull asw much clean and unbroken stuff as I can.

Also, I will have 2 sets of valve cover and air cleaner lids with custom paint in metallic silver and black, and metallic blue.(I do custom paint projects)

By sdcvcc (68.101.197.93) on Friday, July 30, 2004 - 07:27 pm:

OK. I am writing all of this down. I will look and see what I find. I will buy the stuff I can afford for tomorrow. If anyone here really needs something then let me know and email me, I can pull it if you buy it next week.
later

By John S. (205.188.209.248) on Friday, July 30, 2004 - 02:49 pm:

I still need a set (left & right) '78-'79 CVCC rear stub axles, with good condition rear radius arms to fit same.
I don't need the brake backing plates,brakedrums etc, or the struts that are also part of the rear suspension. I also need an early (before '78) CVCC fuel pump relay.

By Keil Shepherd (Medicineman) (81.131.181.138) on Friday, July 30, 2004 - 11:01 am:

I need a set of the aluminium/ rubber side trim strips from a 1 G wagon. If the rubber's trashed that's not too much hassle, I can get it made locally but I really need the aluminium bits.

Wouldn't mind a rear wiper setup. The motor and arm's the most important, the washer baggie and stuff probably wouldn't fit my 5-door

If you can help could we arrange for postage to UK?

Cheers!

By jms (68.107.182.165) on Friday, July 30, 2004 - 05:20 am:

rear wiper set up

By Jason (Roadwarrior) (24.80.29.179) on Friday, July 30, 2004 - 01:35 am:

i need parts for my 77 civic

- driver side window regulator assembly.

- chrome headlight trim ring, (passenger side)

- front and rear chrome bumpers (straight, and rust free, no dents)

please let me know if available.

rocketttman@rocketmail.com

By 78cvcc (207.6.231.48) on Friday, July 30, 2004 - 12:08 am:

i have 2 78 civic.trunk modles and hatch modles.but i m not ur members.what can i do??

By Canada76civic (Canada76civic) (68.146.162.237) on Thursday, July 29, 2004 - 11:28 pm:

sdcvcc - great, do let me know how much for the parts I asked:

Both mirrors (for both doors, chrome ones if possible! I like that ones)

Fender and rear side turn signals (for '75-77 Civics, mine is a '76)

Original Wipers

I don't know if your local yard might have a good clean rear bumper off 1G civics, but check and tell me then ok? I'm in a market for one.

Thanks!

By Ed (24.100.5.141) on Thursday, July 29, 2004 - 10:54 pm:

Here's my wish list:

-- 13" Enkei's 6-diamond spoke (like Richard Nasr's - Justin/Twyla: please find the fourth wheel )

also see this post: http://www.civic1200.com/discus/messages/3923/5061.html?

-- steel wheel red center caps but with squared edges - like the 'RS' civic)

-- alloy wheel black center caps (for the CVCC, and first gen accords)

-- rear window wiper assembly with washer fluid container

-- 'RS' badge for front grill (I like the look of it !)

-- cigarette lighter

-- AM/FM radio

-- AM/FM Stereo Cassette by Pioneer

-- AM/FM Stereo 8-Track Pioneer

-- large wooden gear shift knob with Honda logo

-- OEM accessory floor mats

-- OEM or AFTER-MARKET rear hatch tonneau cover / package cover

-- AFTER-MARKET center floor console with armrest and ashtray


AND......

-- BOSS HOSS REDLINE HOT WHEEL ?!?!?!

thanks
Ed

By sdcvcc (68.101.197.93) on Thursday, July 29, 2004 - 10:43 pm:

I will look for one.

By AndyD (67.241.174.24) on Thursday, July 29, 2004 - 09:36 pm:

Hello,
I'd reward you well for a clean rear chrome bumper overrider if you stumble upon one (pix below) ...

By sdcvcc (68.101.197.93) on Thursday, July 29, 2004 - 09:33 pm:

I will look for all of those items. Ill post back Sat. night.
I know there are signal markers and such. Mirrors and wipers, yes. Most of the cars have seats but they are all thrashed. I would say
150$ for the spindles and all, roof rack probably not and radio YES.

By Jonathan (68.193.6.173) on Thursday, July 29, 2004 - 07:22 pm:

Hey, how much do you think it would be for a set of spindles, rotors, and calipers from one of those wagons? I guess I'd need everything required to get the bigger brakes.

Any of the 2-door Civics there have a roof rack? Any of them have a AM/FM radio with or without a cassette player?

By Canada76civic (Canada76civic) (68.146.162.237) on Thursday, July 29, 2004 - 07:05 pm:

If you can - I need fender turn signals and rear side signals too. Also mirrors (driver and passenager maybe?) and pair of wipers (I have the arms but no wipers on there).

I think that's about all I need for now. I would have asked for bucket seats off 1G civics in there but I dunno how good they are... Tell me what you see there,ok?

Thanks!!

By Jeff Cannon (Cannon) (4.16.0.15) on Thursday, July 29, 2004 - 06:14 pm:

You're in SD huh? Man, I wish I had some time I would come down...I am in the inland empire. Could you check out how the seat are? I need a new upper rear and two front. Let me know. If need be, I can go down next weekend and pick them up if they are a good price and such.

By sdcvcc (68.101.197.93) on Thursday, July 29, 2004 - 06:11 pm:

I myself will be yanking some wagon spindles for my 4x100 conversion. Also some other suspension and misc. engine and body parts. If you post here and leave a request I will print it out and see if I can find it there. Very cheap prices here in San Diego yards. 3 or 4 1G wagons and an assortment of a few 1G civs and acc's along with alot of 2 G models.